Step 3 - Part 2 - Painting

Now that we've almost completed the process of painting a room, you're probably wondering is there a better way? Well, here are some tips that could help you out!
If you take your time, have patience and use good painting techniques you'll achieve that professional look you are striving for. If you rush you're more inclined to splatter or get paint where paint shouldn't be.


Another great tip to keep in mind is getting in the habit of going to the paint can. Let the paint do the work, and you'll save time and get the finish you are looking for.

                                      Using a Brush

1. 1. Hold a brush near the base of the handle.
2. 2. Dip half the bristles into the paint and tap on the lip of the can. Don't wipe it on the side.
3. Paint with enough pressure to bend the bristles slightly — don't bear hard on the brush.
4. A 1"-2" brush offers good control so it is well-suited for detail work such as cutting in around windows or painting molding. To apply paint to larger surfaces such as doors, use a 3"-4" brush.

                                      Using a Roller

1. Roll the roller slowly into the paint in the tray. Then, roll it back and forth until roller cover is evenly coated with paint.
2. Roll onto the tray's ridges to remove excess paint.
3. For smooth surfaces: Cover about a two-foot-square using the N pattern shown. Cross roll to spread the paint. Finish, with light roller strokes in one direction, at a right angle to the cross roll.
4. If the surface you are painting is porous or textured, use a heavy-nap roller cover (1/2" or more). Use a 1/4" nap to maximize sheen on a smoother surface.

                       Painting Double-Hung Windows

1. For double-hung windows move each sash to the center of its track and paint the inside sash, starting with the crossbars. Then, paint the frame. Don't paint the top edge of the inside sash; you'll use it to move the sash. Next, paint the top half of the outside sash, starting with the crossbar, then the frame.

2. Close the sashes to within several inches of the closed position. Paint the rest of the outer sash and the top edge of the inner sash. Paint the window casing, then the sill.

3. Paint the check rails. Move both sashes down as far as they will go, then paint the upper rails. Once the paint is thoroughly dry, move both sashes up and paint the lower rails of the window.

 

 

Casement or Awning Windows

1. Open the windows and paint the top, side and bottom edges.
2. Finish with the crossbars, frame, casings and the sills.

Paneled Doors

1. First remove all hardware or cover it with masking tape. If you happen to splatter or spill always clean up right away with a soft cloth, it'll save a ton of time in the end
2. Start by painting the panels, working from top to bottom. For each panel, paint panel molding first, then the interior, using up and down strokes with your brush.
3. Next, paint the rest of the door, finishing with the outer edges. If the door swings out, paint the hinged edge. If the door swings in, paint the lock-side edge.

Flush Doors

1. Paint the edges first.
2. Then fill in the center area, working from top to bottom.
3. Finish with the frame and jamb.

If you have any questions, we'd love to hear from you! Don't hesitate to call 778-887-8763 or shoot us an email at info@trendzpainting.com

Do you have any tips or tricks? Let us know, leave a comment below :)