How I Roll a Paint on a Wall

1) Cut the entire room first. Check out How I Cut in Paint with a Wall with Textured Ceiling video for more information

2) Make sure your roller has a decent amount of paint on it and apply to wall and spread out by rolling up and down

3) Make sure you have an uniform finish around your electrical outlets and switches

4) When it comes to the corners, keep pressure on the roller to the outside edge so you do not create a "sausage" (When there is excess paint build up, Trendz Painting lingo)

TIPS:

*Lock your arms to ensure you do not hit the ceiling with the roller

*Take care of any "sausages" while the paint is wet. Simply take roller and roll the paint out evenly

Step 3 - Part 2 - Painting

Now that we've almost completed the process of painting a room, you're probably wondering is there a better way? Well, here are some tips that could help you out!
If you take your time, have patience and use good painting techniques you'll achieve that professional look you are striving for. If you rush you're more inclined to splatter or get paint where paint shouldn't be.


Another great tip to keep in mind is getting in the habit of going to the paint can. Let the paint do the work, and you'll save time and get the finish you are looking for.

                                      Using a Brush

1. 1. Hold a brush near the base of the handle.
2. 2. Dip half the bristles into the paint and tap on the lip of the can. Don't wipe it on the side.
3. Paint with enough pressure to bend the bristles slightly — don't bear hard on the brush.
4. A 1"-2" brush offers good control so it is well-suited for detail work such as cutting in around windows or painting molding. To apply paint to larger surfaces such as doors, use a 3"-4" brush.

                                      Using a Roller

1. Roll the roller slowly into the paint in the tray. Then, roll it back and forth until roller cover is evenly coated with paint.
2. Roll onto the tray's ridges to remove excess paint.
3. For smooth surfaces: Cover about a two-foot-square using the N pattern shown. Cross roll to spread the paint. Finish, with light roller strokes in one direction, at a right angle to the cross roll.
4. If the surface you are painting is porous or textured, use a heavy-nap roller cover (1/2" or more). Use a 1/4" nap to maximize sheen on a smoother surface.

                       Painting Double-Hung Windows

1. For double-hung windows move each sash to the center of its track and paint the inside sash, starting with the crossbars. Then, paint the frame. Don't paint the top edge of the inside sash; you'll use it to move the sash. Next, paint the top half of the outside sash, starting with the crossbar, then the frame.

2. Close the sashes to within several inches of the closed position. Paint the rest of the outer sash and the top edge of the inner sash. Paint the window casing, then the sill.

3. Paint the check rails. Move both sashes down as far as they will go, then paint the upper rails. Once the paint is thoroughly dry, move both sashes up and paint the lower rails of the window.

 

 

Casement or Awning Windows

1. Open the windows and paint the top, side and bottom edges.
2. Finish with the crossbars, frame, casings and the sills.

Paneled Doors

1. First remove all hardware or cover it with masking tape. If you happen to splatter or spill always clean up right away with a soft cloth, it'll save a ton of time in the end
2. Start by painting the panels, working from top to bottom. For each panel, paint panel molding first, then the interior, using up and down strokes with your brush.
3. Next, paint the rest of the door, finishing with the outer edges. If the door swings out, paint the hinged edge. If the door swings in, paint the lock-side edge.

Flush Doors

1. Paint the edges first.
2. Then fill in the center area, working from top to bottom.
3. Finish with the frame and jamb.

If you have any questions, we'd love to hear from you! Don't hesitate to call 778-887-8763 or shoot us an email at info@trendzpainting.com

Do you have any tips or tricks? Let us know, leave a comment below :)

Step 2 - Part 2 - Primer

To get a great-looking finish coat and beautiful, long-lasting results, be sure to properly apply primer to surfaces prior to painting. There are many different characteristics when it comes to primer. It can be confusing; however the main job of primer is to:

·         Achieve a smooth, professional finish

·         Block stains, marks and odors

·         Assure adhesion

·         Speed topcoating

·         Prevent peeling

·         Attain the truest paint colour in the least amount of coats

·         Improve touch-up performance of the topcoat

Here are a few examples of the primers out there

Premium Wall & Wood Primer

·         Premium quality primer for the smoothest finish

Multi-Purpose Latex Primer

·         General purpose whole-house primer for multiple surfaces

Drywall Primer

·         Seals new drywall and previously painted walls for a consistent finish

Pre-Wallcovering Primer

·         Primes, seals and sizes in one coat

Multi-Purpose Oil-Based Primer

·         Versatile sealer and stain blocker, assures a uniform finish

Adhesion Primer

·         Tightly bonds to slick and glossy surfaces

White Pigmented Shallac Primer

·         Highest performing primer for sealing out the toughest stains and odors in one coat

Concrete and Masonry Primer

·         Seals and adheres to concrete, brick, stucco and plaster

We understand choosing the best primer can be confusing and we’re more than happy to help. Join the conversation on Facebook, shoot us and email or contact us at 778-887-8763

Do you have any pictures of your do it yourself projects? Don’t be shy, be proud of your work and share your creation on Facebook.

Step 2 - Part 1 - Preparation

Preparation is the most important step in the whole painting process. It’s important to take your time and to thoroughly prepare any surface you are going to be working with. Preparation is the key to good-looking, long-lasting results. A properly prepared surface is clean, solid and dry, without cracks and imperfections.

Here’s how to prepare several different surfaces:

Bare Wood

·         Fill nail holes, joints and cracks with patching mud

·         Sand smooth and remove access dust with tack cloth

·         Prime all bare wood and patch areas with a primer

·         Easy-to-clean latex semi-gloss or gloss would be the best choice for the finished coach

New Plaster Walls

·         New plaster walls must be clean and completely cured

·         Textured or swirl types and soft, porous or powdery plaster must be treated with a solution, repeated until surface is hard, rinse with water, allowed to dry and apply primer

·         Latex is a great topcoat since it’s so easy to work with

New Drywall

·         Panels must be secured

·         All panel joints must be taped and filled before painting

·         Once joint cement is dry, sand smooth, and make sure to clean any dust away

·         Latex is the best choice for drywall

Wallpaper

·         Always remove wallpaper! To remove wallpaper you can either use a chemical remover or a steamer, depends on the condition of the wallpaper

·         Make sure to clean off all adhesive, wash and allow walls to dry

·         Previously Painted Surfaces

·         Make sure all remnants of build up are washed off, use appropriate cleaner, rinse and allow walls to dry

·         Remove all loose paint and dust

·         Patch holes and cracks with patching mud, allow mud to dry, sand smooth

·         Glossy or nonporous surfaces required you to lightly sand to a dull finish or use an abrasive cleanser

·         Remove dust and cleaner residue

·         Ensure you prime all bare areas prior to applying the topcoat. Try to avoid “spot-priming” this will hinder your end result

Masonry, Concrete, Cement or Block

·         New surfaces must be cured, allow approximately 30 days. If painting cannot wait 30 days, allow the surface to cure 7 days and prime surface with masonry primer

·         Remove all form release and curing agents

·         Rough surfaces can be filled to provide smooth finish

The basics of preparation apply to every surface, for the best results make sure the surface is clean, solid and dry before starting. If you have any questions regarding a surface don’t hesitation to give us a call, or send us an email we’d be happy to assist you.